The work is to make the building safe to enter, clean or remove what cannot be saved, dry the structure and record everything for the insurer. Use Call Now to describe what happened and you will be connected with an independent restoration company serving the San Antonio area.
Types of smoke and soot, and why they matter
| Type | Where it comes from | What it leaves behind |
|---|---|---|
| Dry smoke | Fast, hot fires of paper and wood | Dry, powdery soot that is often easy to lift |
| Wet smoke | Slow, smoldering fires of plastic and rubber | Smeared, sticky residue with a strong odor |
| Fuel oil soot | Furnace puff-backs and heating oil fires | Fine black soot spread across a whole floor |
| Suppression residue | Extinguisher powder and fire retardant | Fine powder that settles on surfaces and electronics |
| Protein residue | Burnt cooking food | A thin, almost invisible film with a heavy smell |
What the written scope should list
- Each room affected and the type of damage in it: char, heat, smoke, soot or water
- The duct cleaning and the checks on the heating and cooling system
- The surfaces to be cleaned, sealed or removed
- What is left to the rebuild and who coordinates it
- The contents to be cleaned on site, packed out or discarded
- The odor treatment method and how its result will be checked
- The drying plan for any wet materials and how readings will be recorded
Questions to ask a fire damage restoration company
- Who checks that the building is safe to enter and work in?
- Where does mitigation end and the rebuild begin?
- How will you treat the odor, and how will you check that it is gone?
- What do you document for my insurer, and when do I get it?
- Which kind of smoke and soot do you see, and how does that change the cleaning?
- How do you handle contents, and what record will I receive?
- What will you clean, what will you seal and what will you remove?
Documentation and the line between mitigation and rebuild
The IICRC S700 standard is the industry reference for fire and smoke damage restoration. A written scope should list the rooms, the surfaces, the contents and the methods, with photographs from before and after. Mitigation comes first: board-up, tarping, cleaning, odor treatment and drying. Rebuilding walls, ceilings and finishes is a separate phase, usually by a licensed contractor, and it starts once the structure is clean and dry. Ask who coordinates the handover and what your insurer needs at each stage.
Water from the fire response
Hoses and sprinklers leave water in ceilings, walls and floors, and once soot is mixed in, that water is no longer clean. It is extracted, wet insulation and drywall are removed, and the structure is dried with air movers and dehumidifiers under the same IICRC S500 approach used for any water loss. Drying and smoke cleaning have to be planned together, because wet soot is harder to clean than dry soot and wet materials can grow mold within a day or two.
Board-up, tarping and securing the property
After a fire, openings left by broken windows, doors and burnt roof sections let in rain, animals and strangers. Board-up and roof tarping protect the building while the claim is sorted out and the restoration is planned. Ask the provider what it will secure on the first visit, who confirms that the structure is safe to work in, and how access will be arranged if you are staying somewhere else.
What to do and what not to do after a fire
- Do not enter until the fire service or an inspector says the building is safe
- Keep the electricity and gas off until a professional has checked them
- Do not turn on the heating or cooling system, which can spread soot through the ducts
- Do not wipe soot with a wet cloth or a household cleaner, which can push it into the surface
- Photograph the damage from safe places and list damaged items before anything is moved
- Keep a record of emergency expenses and lodging for your insurer
- Ask the provider to board up openings and cover the roof if weather is a risk
Structure, ducts and contents
A fire can weaken framing, damage wiring and leave soot in ducts. A qualified professional should assess the structure before work starts, and the heating and cooling ducts are cleaned or checked so that soot is not blown back into clean rooms.
Belongings are sorted into what can stay, what can be cleaned on site and what needs a pack-out. Hard goods can be cleaned in an ultrasonic tank, textiles can be laundered or dry cleaned, and electronics are best handled by a specialist. Ask for an item list and a record of what returns to you and when.
Cleaning methods, from soot removal to odor
Cleaning follows an order. Loose soot is lifted first with HEPA vacuums and dry cleaning sponges, because wet cleaning too early smears soot into the surface. Wet smoke and protein residue need degreasing cleaners after the dry step. Surfaces that cannot be cleaned, such as carpet pad, insulation and some porous finishes, are removed and replaced.
Odor is treated at its source. After cleaning, a provider may use thermal fogging, hydroxyl or ozone equipment in rooms that nobody is using, or sealing primers on framing that still holds smoke odor. Ask how the result will be checked, because a smell that returns on a warm day means the source was not reached.
What makes fire damage restoration different in San Antonio
San Antonio is a large Texas city with limestone soils, many slab foundations and a climate of hot summers and sudden heavy storms. Flash floods can follow intense rain on the Edwards Plateau and fill low-lying streets and homes quickly.
Hailstorms damage roofs, and the resulting leaks wet attics and ceilings. Slab leaks, water heater failures and AC condensate drains are common causes of interior water damage in homes. Ask the provider how these local conditions change how fast materials dry and what you should expect at your address.
Fire damage restoration across San Antonio and nearby cities
The area covered by Damage Restoration San Antonio is San Antonio, Texas and its surroundings, among them Alamo Heights, Schertz, New Braunfels, Boerne and Helotes. Each call and request is confirmed by address.
At the top of the page, Call Now lets you say what happened and when. An independent restoration company then confirms your address, assesses the damage and puts the scope in writing.
Related help in San Antonio
If this is not quite your situation, these pages cover the neighboring questions: Water damage restoration; Interior repair after water damage; Structural drying and dehumidification; Signs and inspection: damage restoration. The service area list shows every nearby city and ZIP code covered.